Enterasys Networks 8000/8600 - Manual (Page 125)

Enterasys X-Pedition 8000/8600 Getting Started Guide 113
SSR-GSX21-02-AA and SSR-GLX29-02-AA
SSR-GSX21-02-AA and SSR-GLX29-02-AA
Connector Pin Assignments
The connector pins are assigned as follows:
Cabling and Connector Specifications
The following table lists the media specifications for the SSR-GLX39-02 (T-Series) line card.
Table 37. SSR-GSX21-02-AA and SSR-GLX29-02-AA Rx/Tx Pin Assignments
Pin Connection
Rx When connecting ports with a Fiber Optic cable, ensure that you mate the connections
properly (i.e., connect Tx ports to Rx ports). This may require the use of a fiber
crossover cable.
Tx
Table 38. SSR-GLX39-02 Media Specifications
Port Type Specification
1000BASE-LX • 802.3z standard (also uses 802.3x for flow control)
• SC-style Media Interface Connector (MIC); either connection pin in the MIC can
be used for transmit or receive; see SSR-GSX21-02-AA and SSR-GLX29-02-AA
on
page 113 for attaching cables
• 62.5 micron or 50 micron multimode fiber-optic cable
• 9.5 micron single mode fiber-optic cable
• Maximum 550 meters (1804 feet)
1
segment length for 62.5 micron multimode
fiber-optic cable
• Maximum 550 meters (1804 feet)
1
segment length for 50 micron multimode fiber-
optic cable
• Maximum 5 kilometers (16404 feet) segment length for 10 micron single mode
fiber-optic cable
1. Mode Conditioning Patch cord required.