Enterasys Networks 8000/8600 - Manual (Page 63)

Enterasys X-Pedition 8000/8600 Getting Started Guide 51
Chapter 2
Hardware Installation
This chapter provides hardware installation information and procedures in the following sections:
• Safety considerations
• Installing the hardware
If the hardware is already installed and you are ready to install the software and perform basic
system configuration, see
Chapter 3, Software Installation and Setup .
Safety Considerations
Read the following safety warnings and product cautions to avoid personal injury or product
damage.
Preventing Injury
Cautions : Observe the following safety warnings to prevent accidental injury when working with
the Enterasys X-Pedition (X-Pedition) hardware.
• To avoid back strain, be careful when lifting the chassis out of the shipping box.
• Never attempt to rack mount the X-Pedition chassis unaided. Ask an assistant to help you hold
the chassis.
• Never operate the X-Pedition with exposed power-supply bays or module slots. You can leave
the slots exposed but make sure you do not place any tools or body parts in the slot.
ELECTRICAL HAZARD: Only qualified personnel should perform installation procedures.