Enterasys Networks 8000/8600 - Manual (Page 14)

Specifications
2 Enterasys X-Pedition 8000/8600 Getting Started Guide
The following table lists the basic hardware and software specifications for the X-Pedition.
Feature Specification
Throughput • 16-Gbps non-blocking switching fabric (X-Pedition 8000)
• 32-Gbps non-blocking switching fabric (X-Pedition 8600)
• Up to 30 million packets-per-second routing throughput (X-Pedition 8600)
• Up to 15 million packets-per-second routing throughput (X-Pedition 8000)
Capacity • Up to 250,000 routes
• Up to 2,000,000 Layer-4 application flows (X-Pedition 8000)
• Up to 4,000,000 Layer-4 application flows (X-Pedition 8600)
• 400,000 Layer-2 MAC addresses (X-Pedition 8000)
• 800,000 Layer-2 MAC addresses (X-Pedition 8600)
• 4,096 Virtual LANs (VLANs)
• 20,000 Layer-2 security and access-control filters
• Up to 16 MB input/output buffering per Gigabit port
• 1 MB input/output buffering per 10/100 port
• 20 MB shared input/output buffering across WAN ports on a WAN module
• 32 MB input/output buffering per Packet Over SONET/SDH OC-3c port
• 64 MB input/output buffering per Packet Over SONET/SDH OC-12c port
Routing protocols • IP: RIP v1/v2, OSPF, BGP 2, 3, 4
• IPX: RIP, SAP
• Multicast: IGMP, DVMRP, PIM-SM
• AppleTalk
Bridging and VLAN
protocols • 802.1d Spanning Tree
• 802.1Q (VLAN trunking)
Media interface
protocols • 802.3 (100BASE-T)
• 802.3u (100BASE-TX, 100BASE-FX)
• 802.3x (1000BASE-SX, 1000BASE-LX)
• 802.3z (1000BASE-SX, 1000BASE-LX)
• 802.3ab (1000BASE-T)
Quality of Service
(QoS) • Layer-2 prioritization (802.1p)
• Layer-3 source-destination flows
• Layer-4 source-destination flows
• Layer-4 application flows
RMON • RMON v1/v2 for each port
Management • SNMP (v1, v2C, v3)
• Emacs-like Command Line Interface (CLI)