Enterasys Networks 8000/8600 - Manual (Page 21)

Enterasys X-Pedition 8000/8600 Getting Started Guide 9
Features
You can configure QoS policies for the following types of traffic:
• Layer-2 prioritization (802.1p)
• Layer-3 source-destination flows
• Layer-4 source-destination flows
• Layer-4 application flows
Statistics
The X-Pedition can provide extensive statistical data on demand. You can access the following
types of statistics:
• Layer-2 RMON and MIB II Statistics – Port statistics for normal packets and for errors (packets
in, packets out, CRC errors, and so on)
• Layer-3 RMON v2 Statistics – Statistics for ICMP, IP, IP-interface, IP routing, IP multicast,
VLAN
• Layer-4 RMON v2 Statistics – Statistics for TCP and UDP
• NetFlow – The export of flow accounting statistics
Management Platforms
You can manage the X-Pedition using the following management platforms:
• Command Line Interface (CLI) – An Emacs editor-like interface that accepts typed
commands and responds when applicable with messages or tables. You will use the CLI to
perform the basic setup procedures described in
Chapter 3 of this guide.
• SNMP MIBs and traps – The X-Pedition supports SNMP v1, SNMP v2C, SNMP v3, and
many standard networking MIBs. You can access the X-Pedition’s SNMP agent using
integration software for Enterasys Netsight Atlas, Netsight Element Manager 3.0, or HP
OpenView 5.x on Windows NT, Solaris 2.x, or Aprisma SPECTRUM on Solaris 2.x.
Chapter 3
in this guide explains how to set up SNMP on the X-Pedition.