Ssr-serce-04-aa and ssr-serc-04-aa – Enterasys Networks 8000/8600 User Manual

Page 62

Advertising
background image

Hardware Overview

50

Enterasys X-Pedition 8000/8600 Getting Started Guide

SSR-SERCE-04-AA and SSR-SERC-04-AA

The SSR-SERCE-04-AA and SSR-SERC-04-AA line cards each contain two dual-serial WAN
ports (two serial ports located on one high density connector). In addition, the Quad Serial – C line
card includes compression, and the Quad Serial – CE line card includes compression and
encryption, for each WAN port.

Figure 22

shows the front panel of the Quad Serial – CE WAN line

card.

Figure 22. Front panel of the SSR-SERCE-04-AA line card

LEDs

1,2

Tx

Rx

Link

Quad Serial - C

SSR-SERCE-04-AA

1

2

3,4

Tx

Rx

Link

3

4

Online

Offline

Hot

Swap

Table 17. SSR-SERCE-04-AA and SSR-SERC-04-AA line card LEDs

LED

Condition

Description

Offline

Amber

The line card is offline (powered off) but is ready for hot swap.

The Offline LED also is lit briefly during a reboot or reset of the
X-Pedition but goes out as soon as the control module discovers
the line card.

Online

Green

The line card is online and is ready to receive, process, and send
packets if configured to do so.

Per-port Link

On

The line card detected a cable plugged into the port and a good
link is established.

Per-port Rx

On

The port’s transceiver received data.

Per-port Tx

On

The port’s transceiver transmitted data.

Advertising