Rose Electronics UltraConsole Remote 2 - Manual (Page 11)

OVERVIEW
ULTRACONSOLE REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 5
System overview
The UltraConsole Remote 2 is designed with the latest in KVM switching and remote access technology. It provides
a comprehensive solution for local and remote server access. Local access is from a KVM station connected directly
to the UltraConsole Remote 2. Remote access is from any Windows based workstation on your network. An
unlimited number of workstations can be set-up to access the UltraConsole Remote 2, but a maximum of 4 remote
users can be connected simultaneously.
Basic installation of the UltraConsole Remote 2 is easy and straightforward. The installation consists of:
1. Install the hardware. (Unit, cables, CPUs/Servers, serial devices, local KVM station)
2. Configuring the UltraConsole Remote 2 from the local KVM station for remote access (assign IP, sub-net, etc)
3. Remotely configure the unit from a Windows based workstation on your network
4. Configure the CPU and KVM ports
The Versatility and flexibility of the UltraConsole Remote 2 gives you the capability of expanding the number of
computers/servers that can be accessed to 1,000. The expansion can be done by adding additional UltraConsole
units or other Rose Electronics KVM switches
Figure 1. Typical Single Unit Application
Network
Remote
Workstation
Local KVM
Connected
Computers
(1-8)
UltraConsole Remote 2