Rose Electronics UltraConsole Remote 2 User Manual
Page 37
ULTRACONSOLE REMOTE 2 INSTALLATION AND OPERATIONS MANUAL
31
Save menu
Figure 17. Save menu
When changes are made to any configuration, they must be saved in flash memory to insure that the changes will be
active after a power cycle. It is recommended that all users be logged off from all systems prior to saving any
configuration changes. To save the settings, select save and press [Enter]. The UltraConsole will check and display
how many CPU cards in the system to update. This is the total number of CPU cards (RS232 ports) in the system
not counting the one the KVM station is connected to. (Total boards – 1)
A YES/NO selection box will display. Choose “YES” to save the changes to flash memory on all powered-on
UltraConsole switches.
Choose “NO” for temporary or incorrect changes. The temporary settings will only be in effect as long as power is
applied to the Unit. Once power is cycled, unsaved changes, other than the starting computer number, are lost and
the previously saved configuration settings will be effective.