Rose Electronics UltraConsole Remote 2 - Manual (Page 9)

ULTRACONSOLE REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 3
Cable requirements
The cable requirements for your system will vary depending on the types of equipment connected to the
UltraConsole Remote 2 and the equipment used for the local KVM station. A KVM cable is needed for the local KVM
station, a CPU cable for each device connected to the UltraConsole Remote 2, expansion cables if the system is
expanded in a BUS or RING configuration, and a cable to connect the unit your network. Rose Electronics offers a
wide variety of cable types to directly connect your PC’s, Sun systems, MAC computers and others. See Appendix B
for cable part numbers.
Package contents
The shipping package content consists of the following:
 The UltraConsole Remote 2 unit
 Rackmount Kit
 Power cord (North American shipments only)
 RJ12 serial cable
 RJ to DB9 adapter
 Installation and operations manual
Serial, CPU, KVM, and expansion cables are usually shipped separately. If the package contents are not correct,
contact Rose Electronics or your reseller, so the discrepancy can be quickly resolved.
Rose Electronics web site
Visit our web site at www.rose.com for additional information on the UltraConsole Remote switch and other products
offered by Rose Electronics that are designed for data center applications, classroom environments, and many other
switching and extending applications.
Register your product for future updates at: www.rose.com/htm/online-registrationform.htm