Rose Electronics UltraMatrix Remote 2 - Manual (Page 19)

ULTRAMATRIX REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 13
Local Unit Configuration Menu
Selecting the Unit Configuration tab allows you to define the Unit setup details such as the keyboard layout, admin
password, time and date, and encryption.
Figure 10. Local Unit Configuration menu
Hardware / Firmware
The version level for the hardware and firmware are shown in these fields.
Keybd Layout
Use the left or right arrow keys to select the keyboard type expected from the host computers.
Admin password
Enter a password of at least six characters that has a mix of letters and numerals. The background color will remain
red until a strong enough password has been entered, and then the background will change to blue. This password
will be used by the administrator to modify the unit or network configuration.
Unit Name
The name entered here will be displayed on the local menus and the remote VNC/browser windows.
Hot Keys
Use the left and right arrow keys to select an appropriate hot key sequence for the locally connected keyboard. This
sequence is used in combination with other key presses to access the on-screen menus. The options are: Ctrl+Alt
(default), Ctrl+Shift, Alt+Shift, Alt Gr, Left + Right Alt, Left Ctrl + Alt or Right Ctrl + Alt.
Screensaver
Use the left and right arrow keys to select an appropriate period of inactivity on the local keyboard or mouse before a
screensaver is displayed and the user is logged out. This setting applies to local users only and once the screensaver
is displayed, for security purposes the user is required to log in again. The timeout period can be selected between 5
minutes and 1 day (24 hours), it cannot be disabled.
Time and Date
Use the left and right arrow keys to select the correct time and date. The time entry uses the 24 hour clock notation.
The internal real time clock will continue to run for roughly one week without power to the UltraMatrix Remote 2, after
that it will be lost and require resetting. Use the up and down arrow keys to move between each of the sections within
the time and date entries.
Encryption
Arrange this setting according to your security requirements. Three options are available: Always on, prefer off, and
prefer on.
When all information has been entered, click on save then return back to the Configuration menu and select the
Network tab. The network information is entered on this screen.