Rose Electronics UltraMatrix Remote 2 - Manual (Page 45)

ULTRAMATRIX REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 39
With the CPU port configured for serial support and the appropriate serial cable connected, the KVM station can
access the connected serial device the same way you would access it using a computer terminal.
When you switch to a CPU port that is configured for serial support, the powerful OSD will emulate a VT220 terminal.
You can also use the KVM station in a standard TTY mode which will automatically scroll incoming data. The example
below shows a typical screen from a UNIX computer. The data is shown in a standard 24 x 80 area with two status
lines. The first line shows the current KVM station name, user name, connect mode, and computer name. The
second line shows the command functions available.
The page up and page down keys allow you to scroll the incoming pages in the four page scroll buffer. The F12 key
clears the screen.
CPU port #8
configured for
serial Function
Serial
Device
CPU’s Local
KVM Remote
Workstation
Network
UltraMatrix Remote