TA Triumph-Adler LP 218 - Manual (Page 132)

4-49
Chapt
er
4
P
C
L
P
ri
n
ter
Dri
v
er
Using the PCL Printer Driver
Note
Paper Source
The Paper Source item specifies the tray from which paper is fed from
the printer. To change this setting, just select the desired paper source
from the drop-down list. If the desired tray is an option and does not
appear as a paper source, make sure that it has been added in the
Device Options Setting tab.
You can specify to print the first of a multi-page document from a tray
separate from the rest of the document.
Media Type
Use this box to specify the type of media to which you want to print.
You can specify plain paper, transparencies (OHP), thick paper, enve-
lope, or letterhead.
This function is available only when Paper Source is set to Manual
Feed or Tray1 .
◆ The Booklet feature of the printer driver cannot be used when printing N-
up documents (see page 4-44).
◆ The Fit to Paper , Scaling and Booklet settings cannot be enabled at the
same time (see page 4-53).