TA Triumph-Adler LP 218 - Manual (Page 68)

3-5
Cha
p
te
r
3
U
s
in
g
th
e
P
rin
te
r
Printing Paper
Note
◆ Do not use the following types of paper to avoid reduced print quality, a
misfeed or print failure.
• Paper already used in a thermal transfer printer or ink jet printer.
• Paper that is too thin or too thick.
• Paper folded, curled or torn.
• Paper having binding holes or perforations.
• Paper with surfaces that are too smooth or too rough or with varying
surfaces.
• Paper having special coatings on their surfaces such as carbon paper,
heat-sensitive paper and pressure-sensitive paper.
• Sheets of various sizes.
• Paper not cut on right angles.
• Paper bound by glue, staples or clips.
• Paper affixed with labels which are easy to peel.
• Post cards that are warped or bent.
◆ Envelopes should meet the following requirement:
• Sharp folds and edges.
• General mailing envelopes without seals on the glued portion.
• Having flags the full width of the envelope (unacceptable if the flap is
glued).
• Wrinkle-free, no fasteners.
◆ Generally, envelopes perform well, but some types may wrinkle. We
strongly recommend testing and type of envelope before buying it in
large amounts.
◆ For more information, refer to “Loading Paper” on page 3-7.