TA Triumph-Adler DC 6025 - Manual (Page 19)

1-4
Before Using the Fax Machine > Part Names and Functions
Operation Panel
For the names of keys and indicators required when functions other than FAX are used, refer to the machine’s Operation
Guide.
Touch panel. Displays buttons
for configuring machine
settings. Lights when there is paper in
the job separator tray.
Processing: Blinks during fax transmission and
reception.
Memory: Blinks while the machine is accessing the
fax memory or USB memory (general-purpose item).
Attention: Lights or blinks when an error occurs and
a job is stopped.
Displays the System Menu/Counter
screen.
Displays the Status/Job
Cancel screen. Displays the Copy
screen.
Displays the Favorites
screen. Displays the screen for
sending. You can send
the FAX on the basic
send screen.
Displays the Document
Box screen. Displays the FAX screen.
Displays the Interrupt Copy
screen.
Ends operation (logs out)
on the Administration
screen.
Puts the machine into Low
Power Mode.
Puts the machine into Sleep
Mode. Recovers from Sleep
if in Sleep Mode.
Lit when the machine's
main power is on.
Numeric keys.
Enter numbers and
symbols. Clears entered numbers and
characters. Returns settings to their
default states.
Press to specify a registered
destination by a number, such
as a speed dial or address
number. Cancels or pauses the
printing job in progress.
Finalizes numeric key entry,
and finalizes screen during
setting of functions. Operates
linked with the on-screen
[OK]. Starts fax transmission
and processing of
settings.
FAX
On Hook Chain
Check
Address Book
Add Dest.
Direct
Ext Address Book
Functions
10:10
Dest. :
One Touch Key
Recall
Favorites
Ready to send.
G
B
0669_00
* The operation panel may differ from the above
illustration depending on the type of your machine.