TA Triumph-Adler DC 6025 - Manual (Page 59)

4-4
Sending Faxes > Basic transmission procedure
Priority Override Send
A fax job waiting to be sent can be sent by priority override.
1
Press the Status/Job Cancel key.
2
Select the job to be sent by priority override.
Select the fax job to be sent by priority override and press [Menu] and then [Priority Override].
Press [Yes]. The selected fax job is sent by priority override and other fax jobs are moved
down in the transmission queue.
If a broadcast transmission job is in progress...
If a fax job to multiple destinations (broadcast transmission) is in progress, the priority override
job will be sent when transmission to the current destination is completed. When the priority
override job is completed, transmission to the remaining destinations will resume.
However, if the priority override job is a broadcast transmission, the priority override job will
not start until the current broadcast transmission job is finished.
NOTE
If a fax job is in progress, the priority override fax job will be sent after the job in progress is
completed.
Menu
10:10 Status/Job Cancel.
Priority Override
Close
1/1
Status/Job Cancel.
Status
Print Job Status
10:10
Send Job Status
Store Job Status
Scheduled Job
Pause All
Print Jobs
1/4
Send Job Status
10:10 Status/Job Cancel.
0123456
Cancel Close Menu
Sending
1/1
0005
Waiting
Waiting
0006
0007
7890123
5678901
1
3
2
5
G
B
0052-00
G
B
0183-01
G
B
0203-00
4