TA Triumph-Adler DC 6025 - Manual (Page 81)

5-4
Receiving Faxes > FAX Automatic Reception
FAX Automatic Reception
When using this machine as a FAX-dedicated machine that does not receive telephone calls, set the machine to FAX-
dedicated reception. No special operation is required when receiving faxes.
Flow of reception
1
Reception Starts
When a fax has been sent to you, the machine rings the registered number of times, and then
starts receiving the fax.
After reception has started, the Processing indicator blinks.
2
Reception Print
Received faxes are output to the inner tray or job separator tray with the printed side facing
down. The inner tray can hold a maximum of 250 sheets of plain paper (80 g/m²). The job
separator tray can hold a maximum of 100 sheets of plain paper (80 g/m²). However, the
number of sheets varies with the condition of the paper to be used.
NOTE
You can change the number of times the ringing tone rings. (Refer to FAX on page 9-6.)
IMPORTANT
The number of sheets that can be held varies with the output tray. Refer to the
machine’s Operation Guide. When the number of sheets to be printed exceeds the
number of sheets that can be held, remove all the paper on the inner tray or job
separator tray.
Even if the machine is not capable of printing due to paper running out or a paper
jam, it can still receive faxes (memory reception).
NOTE
The output tray for received faxes can be set. For details, refer to Default fax settings on
page 9-2.