TA Triumph-Adler DC 6025 - Manual (Page 62)

4-7
Sending Faxes > Fax transmission functions
Fax transmission functions
Functions frequently used for transmission are shown at the bottom of the transmission screen. To show other functions,
press [Functions]. Use [] or [] to select the function.
What do you want to do? Reference Page
Specify the original size. Original Size Selection  page 4-8
Specify the correct original orientation. Original Orientation  page 4-9
Send mixed size originals. Mixed Sized Originals  page 4-9
Automatically scan 2-sided originals. 2-sided/Book Original  page 4-10
Select the size of the image being sent. Sending Size Selection  page 4-11
Set the resolution at which to scan originals. Selecting the FAX Resolution  page
4-11
Adjust the density. Selecting the Density  page 4-12
Select original image type for best results. Selection of Original Image  page
4-12
Change the size of the image being sent. Zoom  page 4-13
Scan a large number of originals separately and then produce as one job. Continuous Scan  page 4-13
Add a file name to the job to easily check its status. File Name  page 4-22
Send notice by e-mail when a job is complete. Job Finish Notice  page 4-21
Specify a time for transmission. Delayed Transmission  page 4-16
Connect to the destination first and then scan the original. Direct Transmission  page 4-14
Set up another transmission while communication is taking place. Standby Transmission  page 4-19
Interrupt transmission and send another original. Interrupt Send  page 4-20
Send an original using a sub address. Sub Address Transmission  page
6-23
Initiate reception of a fax by controlling the receiving machine. Polling Communication  page 6-26
Encrypt an original to send it safely. Encryption  page 6-36