TA Triumph-Adler DC 6025 - Manual (Page 198)

11-2
Appendix > Character Entry Method
Character Entry Method
To enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.
Entry Screens
Lower-case Letter Entry Screen
NOTE
QWERTY, QWERTZ and AZERTY are keyboard layouts the same as a PC keyboard are available. If necessary,
change the layout. For information on how to change layouts, refer to the machine’s Operation Guide.
QWERTY layout is used here as an example. You may use another layout following the same steps.
No. Display/Key Description
1 Display Displays entered characters.
2 Keyboard Press the character to enter.
3 [ABC] / [Symbol] Select the characters that are entered. To enter symbols or numbers,
select [Symbol].
4 [A/a] / [a/A] Press to switch between upper case and lower case.
5 Cursor Key Press to move the cursor on the display.
6 [Input] / [Limit] Display Displays maximum number of characters and the number of
characters entered.
7 Delete Key Press to delete a character to the left of the cursor.
8 Space Key Press to insert a space.
9 Enter Key Press to enter a line break.
10 [Cancel] Press to cancel entered characters and return to the screen before
the entry was made.
11 [< Back] Press to return to the previous screen.
12 [OK] / [Next >] Press to save the entered characters and move to the next screen.
1
2
10 12
4 5 7
8
9
6 3
GB0057_E01
11