4 wiring the dc power input – PLANET MGSD-10080F User Manual
Page 39
Advertising
User’s Manual of MGSD-10080F
39
2.1.4 Wiring the DC Power Input
The 6-contact terminal block connector on the front panel of MGSD-10080F is used for two DC redundant powers input. Please
follow the steps below to insert the power wire.
1.
Insert positive / negative DC power wires into the contacts 1 and 2 for DC POWER 1, or 5 and 6 for DC POWER 2.
Figure 2-3: MGSD-10080F Upper Panel
Advertising