PLANET MGSD-10080F - Manual (Page 514)

User’s Manual of MGSD-10080F
514
<port_list> : Port list or 'all', default: All ports
<class_list>: QoS class list, 0-7
<command> : Statistics command: clear|green|yellow|red|discard
EVC ECE Add
Description:
Add or modify EVC Control Entry (ECE):
- If <ece_id> is specified and the ECE exists, the ECE will be modified.
- If <ece_id> is omitted or the ECE does not exist, a new ECE will be added.
- If <ece_id_next> is specified, the ECE will be placed before this entry.
- If <ece_id_next> is 'last', the ECE will be placed at the end of the list.
- If <ece_id_next> is omitted and it is a new ECE, the ECE will be placed last.
- If <ece_id_next> is omitted and the ECE exists, the ECE will not be moved.
Syntax:
EVC ECE Add [<ece_id>] [<ece_id_next>] [uni] [<uni_list>] [<dmac_type>] [<smac>][tag] [<tag_type>] [<vid>] [<pcp>]
[<dei>] [all | (ipv4 [<proto>] [<sip>] [<dscp>] [<fragment>] [<sport>] [<dport>]) | (ipv6 [<proto>] [<sip_v6>] [<dscp>]
[<sport>] [<dport>])] [direction] [<direction>] [evc] [<evc_id>] [pop] [<pop>] [policy] [<policy>] [class] [<class>] [outer]
[<ot_mode>] [<ot_preserve>] [<ot_pcp>] [<ot_dei>]
Parameters:
<ece_id> : ECE ID (1-128)
<ece_id_next>: Next ECE ID (1-128) or 'last'
uni : UNI keyword
<uni_list> : UNI port list (1-10)
<dmac_type> : DMAC type: any|unicast|multicast|broadcast
<smac> : SMAC or 'any'
tag : Tag matching keyword
<tag_type> : Tag type: tagged|untagged|any
<vid> : VLAN ID value/range (0-4095) or 'any'
<pcp> : PCP value/range (0-7) or 'any'
<dei> : DEI value, 0, 1 or 'any'
all : Keyword for matching any frame type
ipv4 : Keyword for matching IPv4 frames
<proto> : IP protocol value (0-255) or 'any'
<sip> : IPv4 source address (a.b.c.d/n) or 'any'
<dscp> : DSCP value/range (0-63) or 'any'
<fragment> : IPv4 fragment: any|fragment|non-fragment