5 auto-negotiation – PLANET MGSD-10080F User Manual
Page 618
Advertising
User’s Manual of MGSD-10080F
618
7.5 Auto-Negotiation
The STP ports on the Managed Switch have built-in “Auto-negotiation”. This technology automatically sets the best
possible bandwidth when a connection is established with another network device (usually at Power On or Reset). This is
done by detect the modes and speeds at the second of both device is connected and capable of, both 10Base-T and
100Base-TX devices can connect with the port in either Half- or Full-Duplex mode. 1000Base-T can be only connected in
Full-duplex mode.
Advertising