PLANET MGSD-10080F - Manual (Page 577)

User’s Manual of MGSD-10080F
577
6.26 Loop Protect Command
Loop Protect Configuration
Description:
Show Loop Protection configuration.
Syntax:
Loop Protect Configuration
Loop Protect Mode
Description:
Set or show the Loop Protection mode.
Syntax:
Loop Protect Mode [enable|disable]
Parameters:
enable : Enable Loop Protection
disable: Disable Loop Protection
Default Setting:
enable
Loop Protect Transmit
Description:
Set or show the Loop Protection transmit interval.
Syntax:
Loop Protect Transmit [<transmit-time>]
Parameters:
Transmit time interval (1-10 seconds)
Default Setting:
5