PLANET MGSD-10080F - Manual (Page 401)

User’s Manual of MGSD-10080F
401
PVLAN Lookup [<pvlan_id>]
Parameters:
<pvlan_id>: Private VLAN ID, default: Show all PVLANs. The allowed range for a Private VLAN ID is the same as the
switch port number range.
Example:
Lookup PVLAN
MGSD-10080F:/>pvlan lookup
PVLAN ID Ports
-------- -----
1 1-10
PVLAN Isolate
Description:
Set or show the port isolation mode.
Syntax:
PVLAN Isolate [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port isolation
disable : Disable port isolation
(default: Show port isolation port list)
Default Setting:
disable
Example:
Enable isolate for port10
MGSD-10080F:/>pvlan isolate 10 enable