PLANET MGSD-10080F - Manual (Page 47)

User’s Manual of MGSD-10080F
47
2.3.1 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP port
without having to power down the Managed Switch as Figure 2-9 shows below:
Figure 2-9: Plugging in the SFP Transceiver
 Approved PLANET SFP Transceivers
PLANET Managed Switch supports 100/1000 dual mode with both single mode and multi-mode SFP transceivers. The
following list of approved PLANET SFP transceivers is correct at the time of publication:
Gigabit SFP Transceiver Modules
MGB-GT SFP-Port 1000Base-T Module
MGB-SX SFP-Port 1000Base-S X m ini-GBIC module
MGB-LX SFP-Port 1000Base-L X m ini-GBIC module
MGB-L30 SFP-Port 1000Base-L X m ini-GBIC module-30km
MGB-L50 SFP-Port 1000Base-L X m ini-GBIC module-50km
MGB-L70 SFP-Port 1000Base-L X m ini-GBIC module-70km
MGB-L120 SFP-Port 1000Base-L X m ini-GBIC module-120km
MGB-LA10 SFP-Port 1000Base-L X ( W DM,TX:1310nm) mini-GBIC module-10km
MGB-LB10 SFP-Port 1000Base-L X ( W DM,TX:1550nm) mini-GBIC module-10km
MGB-LA20 SFP-Port 1000Base-L X ( W DM,TX:1310nm) mini-GBIC module-20km
MGB-LB20 SFP-Port 1000Base-L X ( W DM,TX:1550nm) mini-GBIC module-20km
MGB-LA40 SFP-Port 1000Base-L X ( W DM,TX:1310nm) mini-GBIC module-40km