PLANET WNAP-7206 - Manual (Page 59)

User Manual of WNAP-7206
-51-
The page includes the following fields:
Object Description
 WAN Connections Select BigPond Cable from the list.
 User Name
 Password
Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
 Auth Server Enter the authenticating server IP address or host name.
 Auth Domain
Type in the domain suffix server name based on your location.
NSW / ACT - nsw.bigpond.net.au
VIC / TAS / WA / SA / NT - vic.bigpond.net.au
QLD - qld.bigpond.net.au
 MTU Size (in bytes)
The normal MTU (Maximum Transmission Unit) value for most
Ethernet networks is 1500 Bytes. It is not recommended that
you change the default MTU Size unless required by your ISP.
 Connect on Demand
In this mode, the Internet connection can be terminated
automatically after a specified inactivity period (Max Idle Time)
and be re-established when you attempt to access the Internet
again. If you want your Internet connection keeps active all the
time, please enter 0 in the Max Idle Time field. Otherwise,
enter the number of minutes you want to have elapsed before
your Internet access disconnects.
 Connect Automatically
Connect automatically after the Device is disconnected. To use
this option, check the radio button.
 Connect Manually
You can click the Connect/Disconnect button to
connect/disconnect immediately. This mode also supports the
Max Idle Time function as Connect on Demand mode. The
Internet connection can be disconnected automatically after a
specified inactivity period and re-established when you attempt
to access the Internet again.
 Connect Click the Connect button to connect immediately.
 Disconnect Click the Disconnect button to disconnect immediately.
 Save Click the Save button to save your settings.
Sometimes the connection cannot be disconnected although you specify a time
to Max Idle Time, because some applications are visiting the Internet continually
in the background.