PLANET WNAP-7206 - Manual (Page 63)

User Manual of WNAP-7206
-55-
 Transmit Power
You can limit the Transmit Power of the Device through this field. You
can select one of the options listed as the below items.
 Channel
This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice
interference problems with another nearby access point. If you select
auto, then the Device will select the best channel automatically.
 Mode This field determines the wireless mode which the Device works on.
 Max Tx Rate
You can limit the maximum tx rate of the Device through this field. You
can select one of the options listed as the below items.
 Enable Wireless Radio
The wireless radio of the Device can be enabled or disabled to allow
wireless stations access. If enabled, the wireless stations will be able
to access the Device; otherwise, wireless stations will not be able to
access the Device.
 Enable SSID Broadcast
If you select the Enable SSID Broadcast checkbox, the wireless
Router will broadcast its name (SSID) on the air.
 Enable DFS Check Enable DFS to enable DFS function.
 Save Click the Save button to save your settings on this page.
5.6.1.2. Multi-SSID Mode