PLANET NVR-1620 - Manual (Page 127)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
To add an SMTP server,
1. Enter the host name or the IP address of the SMTP server.
2. Enter the port of the SMTP server.
3. Specify the sender’s name in the “Sender’s name” field.
4. Enter the sender’s e-mail address.
5. Check “Enable Authentication” and enter the user name and password of
the SMTP server if it requires authentication.
6. Click “Apply” to save the configuration.
*The NVR supports SMTP servers that use base64 or MD5 authentication
methods.
We have finished defining how an event will be triggered and which servers will
be receiving notifications in the previous two sections, now we can finish up
the event configuration by setting:
•Which channels will have event trigger function enabled
•Add system events if you will
•Where the warnings will be sent to and how they will be sent.
Use the checkbox to enable event trigger on the desired channels.
*Once motion detection is enabled on this page, please configure
the motion area and enable motion detection in the corresponding
channels (cameras) from camera's own web UI. The NVR only
detects the first motion area set in the camera. The NVR recognizes
the first motion area by its ID number set in the camera.
* Grayed out checkboxes represent the function that is either not
127