PLANET NVR-1620 - Manual (Page 60)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
Choose what type of privilege you would like this group to have from the
“Privilege Type” drop-down menu.
Its access privilege will then be displayed. You can alter its settings by allowing
or denying access to other cameras using the checkboxes instead of accepting
the defaults
7.5 Disk Setup
Once you install a hard disk to the recorder, you would need to initialize it so
that it can be ready for recording. You can obtain basic information about the
disk you installed on this page.
To initialize it, simply click the “Format” button.
*Due to the chipset limitation, “Hotswap” is NOT supported for SATA
HDD. Please make sure to power on the SATA external HDD and
plug it in to the NVR before the NVR is turned on.
*The USB HDDs will only be listed on the "USB Backup" and "Hard
60