PLANET NVR-1620 - Manual (Page 16)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
Chapter 3.
Connecting to the NVR
There are various ways you can connect to the NVR and below are the
suggested methods for different network setups:
The NVR is placed in a network with a DHCP server: Connect to the NVR by
using “Device Search” Utility.
The NVR is placed in a network without DHCP server (or you are connecting to
it directly): Access NVR with its default IP (192.168.0.20).
3.1 Using Device Search Utility
If the NVR is placed in a corporate network or a local area network where a
DHCP server is already presented, please install the “Device Search” utility
from the bundled CD disk.
To begin, launch the “Device Search” utility from the CD and proceed with the
installation.
16