PLANET NVR-1620 - Manual (Page 48)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
48
The NVR supports three connection types that can be configured depending on
how the network is set up.
If you wish to set the recorder to a static IP address in your local area network,
1. Choose “Static IP” from the “Connection Type” drop-down menu
2. Enter the IP address, subnet mask, default gateway address and DNS server
address for the recorder
* The recorder can detect the presence of a DHCP server upon startup. It sets
itself to static IP address if there is no DHCP server currently presented in the
network. Its DHCP server function is also turned on at the same time to assign
IP addresses to cameras that are later connected to the network or you can
manually turn off the DHCP server function from "System
Configurations">>"Network Setup">>"DHCP Server" if you wish to use a
separate DHCP server.
7.1.2 DHCP Server