2 accessing nvr with its default ip address, Accessing nvr with its default ip address – PLANET NVR-1620 User Manual
Page 19
Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
You may change NVR’s IP address by clicking on the button highlighted below.
You will be prompted for the NVR’s login information before proceeding to
change device’s IP address.
You may click on the button highlighted below to perform search again. Or
double-click on any of the search results to access NVR’s web administration
page.
3.2
Accessing NVR with its default IP address
The NVR comes with a pre-configured static IP address “192.168.0.20”.
However, it is only used when there is no DHCP server presented in the
network. Connect the NVR and PC to your switch or hub, or connect the PC
directly to the NVR using a crossover CAT5 Ethernet cable.
19