PLANET NVR-1620 - Manual (Page 55)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
7.2 Time and Date
Set the time and date by selecting the time zone according to your location. It
is imperative that you set the recorder’s time correctly to avoid the following
errors:
• Incorrect display time for playback videos
• Inconsistent display time of event logs and when they actually occur
After selecting the time zone, choose an option below to set the recorder time.
• Manual – Use the drop-down list and configure the time manually.
• Sync with NTP server – enter the host name or IP address of a valid NTP
server and set how often the recorder should synchronize the time with it by
using the “Update interval” drop-down menu.
• Sync with PC – Check this option to synchronize the recorder time with the
PC that you are currently using to access the recorder.
55