PLANET NVR-1620 - Manual (Page 81)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
9.4 Event Triggers
We have finished defining how an event will be triggered and which servers will
be receiving notifications in the previous two sections, now we can finish up
the event configuration by setting:
•Which channels will have event trigger function enabled
•What is considered to be an event.
•Where the warnings will be sent to and how they will be sent
Use the checkbox to enable event trigger on the desired channels.
*Once motion detection is enabled on this page, please configure
the motion area and enable motion detection in the corresponding
channels (cameras) from camera's own web UI. The NVR only
detects the first motion area set in the camera. The NVR recognizes
the first motion area by its ID number set in the camera.
* Enabling the “custom event” option allows the NVR to receive
events from the CMS software and start recording; events such as
the intelligent video detection in the CMS.
81