ProSoft Technology MVI69-MCM User Manual
Page 49
![background image](/files/866095/content/doc049.png)
MVI69-MCM ♦ CompactLogix or MicroLogix Platform
Configuring the MVI69-MCM Module
Modbus Communication Module
User Manual
ProSoft Technology, Inc.
Page 49 of 167
March 22, 2011
2.3
Downloading the Project to the Module Using a Serial COM port
For the module to use the settings you configured, you must download (copy) the
updated Project file from your PC to the module.
1 In the tree view in ProSoft Configuration Builder, click once to select the
module.
2 Open the Project
menu, and then choose M
ODULE
/D
OWNLOAD
. The program
will scan your PC for a valid com port (this may take a few seconds). When
PCB has found a valid COM port, the Download
dialog box will open.
3 Choose the COM port to use from the
dropdown list, and then click the
D
OWNLOAD
button.
The module will perform a platform check to read and load its new settings.
When the platform check is complete, the status bar in the Download
dialog
box will display the message Module Running.