ProSoft Technology MVI69-MCM - Manual (Page 53)

MVI69-MCM ♦ CompactLogix or MicroLogix Platform Configuring the MVI69-MCM Module
Modbus Communication Module User Manual
ProSoft Technology, Inc. Page 53 of 167
March 22, 2011
2.4.3 [MCM Port x]
The information in this section applies to both Port 1 and Port 2.
Enable
Yes or No
This parameter specifies whether to enable or disable the port. No = Port
Disabled, Yes = Port Enabled.
Type
0=Master, 1=Slave, 2=PT Formatted, 3=PT Formatted Swap
This parameter specifies which device type the port will emulate. Refer to Pass-
Through Control Blocks (page 129) for information on using port types 2 or 3.