ProSoft Technology MVI69-HART - Manual (Page 16)

Start Here MVI69-HART ♦ CompactLogix Platform
User Manual HART Multi-drop Master Communication Module
Page 16 of 169 ProSoft Technology, Inc.
March 29, 2012
1.5 Installing the Module
Before you attempt to install the module, make sure that the bus lever of the
adjacent module is in the unlocked (fully right) position.
Warning: This module is not hot-swappable! Always remove power from the rack before
inserting or removing this module, or damage may result to the module, the processor, or other
connected devices.
1 Align the module using the upper and lower tongue-and-groove slots with the
adjacent module and slide forward in the direction of the arrow.
2 Move the module back along the tongue-and-groove slots until the bus
connectors on the MVI69 module and the adjacent module line up with each
other.