ProSoft Technology MVI69-HART - Manual (Page 64)

Diagnostics and Troubleshooting MVI69-HART ♦ CompactLogix Platform
User Manual HART Multi-drop Master Communication Module
Page 64 of 169 ProSoft Technology, Inc.
March 29, 2012
4.2 Reading Status Data from the Module
The MVI69-HART module returns a status data set to the CompactLogix
processor in read blocks with identification codes of 0 and -1. This data is
transferred to the CompactLogix processor continuously.
The Configuration/Debug port provides the following functionality:

Full view of the module’s configuration data

View of the module’s status data

Version Information

Control over the module (warm boot and cold boot)

Facility to upload and download the module’s configuration file
4.2.1 Using ProSoft Configuration Builder (PCB) for Diagnostics
The Configuration and Debug menu for this module is arranged as a tree
structure, with the Main menu at the top of the tree, and one or more sub-menus
for each menu command. The first menu you see when you connect to the
module is the Main menu.
Because this is a text-based menu system, you enter commands by typing the
[command letter] from your computer keyboard in the Diagnostic window in
ProSoft Configuration Builder (PCB). The module does not respond to mouse
movements or clicks. The command executes as soon as you press the
[ COMMAND LETTER ] — you do not need to press [E NTER ]. When you type a
[ COMMAND LETTER ], a new screen will be displayed in your terminal application.
Using the Diagnostic Window in ProSoft Configuration Builder
Tip: You can have a ProSoft Configuration Builder Diagnostics window open for more than one
module at a time.
To connect to the module’s Configuration/Debug serial port
1 Start PCB, and then select the module to test. Click the right mouse button to
open a shortcut menu.