ProSoft Technology MVI69-HART - Manual (Page 61)

MVI69-HART ♦ CompactLogix Platform Diagnostics and Troubleshooting
HART Multi-drop Master Communication Module User Manual
ProSoft Technology, Inc. Page 61 of 169
March 29, 2012
The LEDs indicate the module’s operating status as follows:
LED Color Status Indication
CFG Green On NA
Off NA
EP Green On NA
Off NA
Off No data is being transferred on the Configuration/Debug port.
APP Amber Off The MVI69-HART is working normally.
On The MVI69-HART module program has recognized a
communication error.
BP Amber On The LED is on when the module is performing a write
operation on the backplane.
Off The LED is off when the module is performing a read
operation on the backplane. Under normal operation, the LED
should blink rapidly on and off.
OK Red/
Green Off The card is not receiving any power and is not securely
plugged into the rack.
Green The module is operating normally.
Red The program has detected an error or is being configured. If
the LED remains red for over 10 seconds, the program has
probably halted. Remove the card from the rack and re-insert
the card to restart the module’s program.
BAT Red Off The battery voltage is OK and functioning.
On The battery voltage is low or battery is not present. Allow
battery to charge by keeping module plugged into rack for 24
hours. If BAT LED still does not go off, contact ProSoft
Technology, as this is not a user serviceable item.
CH01 Green On Data is being transmitted between the module and the
processor.
Off
CH02 Green On Data is being transmitted between the module and the
processor.
Off