NEC M Series 32" Commercial PCAP Touchscreen Display - Manual (Page 54)

English−50
Chapter 6
External Control
This Chapter Includes:
> “Controlling the Monitor via RS-232C” on page 51
> “Controlling the Monitor via LAN” on page 52
> “HTTP Browser” on page 53
> “Commands” on page 59
> “Proof of Play” on page 60
Connecting an external device
There are two options to connect an external device to control the monitor.
• RS-232C terminal.
Connecting an external device to the RS-232C terminal of the monitor with an RS-232C cable.
• LAN port.
Connecting a network to the LAN port of the monitor with a LAN cable (RJ45 category 5 or higher).