NEC M Series 32" Commercial PCAP Touchscreen Display - Manual (Page 76)

English−72
INPUT
INPUT MENU
INPUT SELECT
DisplayPort Selects the input signals source.
HDMI1
HDMI2
VGA(RGB)
Media Player
INPUT SETTINGS
INPUT NAME To rename the input:
1. Highlight the name field.
2. Press SET on the IR remote control to activate the field.
• Use the -/+ buttons to navigate to the character you want to change.
• Press the
 /  buttons to cycle through the available characters (A-Z, 0-9, special characters, and
space).
• Press the SET button when on a letter to switch between uppercase and lowercase.
3. Press EXIT to save the name and exit the name field.
Custom names with a maximum of 14 characters, including spaces, can be set. The characters can be a
mix of letters (A-Z), numbers (0-9), and some symbols.
NAME RESET Returns the current input name to its factory default. Highlight [PROCEED] and press SET on the remote
control to reset the input name.
Options are: PROCEED / CANCEL.
AUTO INPUT CHANGE* 1, * 3, * 4 When enabled, this option can detect and change inputs when a signal is applied or lost. Allows for
customization of the input priority.
NOTE:
This option is unavailable when these OSD menu options are enabled:
• [HUMAN SENSING] is [ENABLED] in the [AUTO DIMMING] settings in the [CONTROL] menu.
NONE The monitor does not search for video signal on the other input connections.
If video signal is lost on the current input, or if the monitor is manually switched to an input that does not
have video signal, the screen will go black and the LED will flash green. If [POWER SAVE] is enabled, the
monitor will enter power saving mode after the period of time set for [POWER SAVE] has passed.
FIRST DETECT* 2 The monitor does not search for a video signal on the other input connections while the current input has a
video signal.
If the current input connection does not have video signal present, the monitor will search for video signal
on the other video input connections. If a video signal is found, the monitor will switch from the current
input to the input with the active video source automatically.
LAST DETECT* 2 The monitor actively searches for a video signal on the other input connections, even while the current
video signal is present. When a new video signal source is applied to another input connection, the monitor
automatically switches to the newly found video source.
If the video signal is lost on the current input connection, the monitor will search for video signal on the
other video input connections. If a video signal is found, the monitor will switch from the current input to the
input with the active video source automatically.
CUSTOM DETECT The monitor only searches for video signal on the inputs selected for the priority numbers. If the signal
is lost, the monitor searches for signal in the priority order and automatically switches to the highest
priority input it finds with an active video signal. The monitor actively searches these inputs. If the current
signal input is not Priority 1 and a new signal is applied to the input assigned to Priority 1, the monitor will
automatically switch to the higher priority input.
NOTE:
• [Media Player] will only work when a USB storage device is connected.