ATEN CL5808N 8-Port 19" Dual Rail LCD Combo KVM Switch - Manual (Page 21)

11
Chapter 2
Hardware Setup
Before you Begin
1. Important safety information regarding the placement of this
device is provided on page 63. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up has been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On function.
3. Packing material has been inserted to protect the CL5808/
CL5816 during shipping. Slide the LCD module out
(see
Opening the Console , page 19, for details), until the
packing material is visible. Remove the packing material before
installing the unit, as shown in the diagram below.