ATEN CL5808N 8-Port 19" Dual Rail LCD Combo KVM Switch - Manual (Page 60)

CL5808/CL5816 User Manual
50
Computer Keyboard/Mouse Reset
If either the keyboard or mouse stop functioning on the computer connected to
the currently selected port, you can perform a keyboard/mouse reset on the
computer with the following steps:
1. Invoke Hotkey mode (see page 46).
2. Press [F5] .
This function has the same effect as unplugging and replugging the keyboard
and mouse on the target computer. After you press [F5] you automatically exit
Hotkey mode and regain keyboard and mouse control on the computer
connected to the KVM port.
If you fail to regain keyboard/mouse control on the computer after pressing
[F5], perform a system reset. For more information see
Reset Switch , page 8.
Hotkey Beeper Control
The beeper (see Activate Beeper, page 40) can be toggled on and off with the
following steps:
1. Invoke Hotkey mode (see page 46).
2. Press [B] .
After you press [B], the beeper toggles on or off. The command line
displays
Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey mode.