Hotkey summary table – ATEN CL5808N 8-Port 19" Dual Rail LCD Combo KVM Switch User Manual
Page 63
5. Keyboard Port Operation
53
Hotkey Summary Table
[Num Lock] +
[-]
or
[Ctrl] + [F12]
[A] [Enter]
or
[Q] [Enter]
Enters Auto
Scan
mode.
When
Auto Scan
mode is in effect, [P] or left
click pauses auto scanning.
When auto scanning is paused, pressing
any key or another left click resumes auto
scanning.
[B]
Switches the beeper on or off.
[Esc] or [Spacebar]
Exits Hotkey mode.
[F1]
Sets the operating system configuration of
the currently selected port to Windows
[F2]
Sets the operating system configuration of
the currently selected port to Mac
[F3]
Sets the operating system configuration of
the currently selected port to Sun
[F5]
Performs a keyboard / mouse reset on the
target computer.
[H]
Switches the key combination used to enter
the
Hotkey
mode keys between [Ctrl] +
[F12] and [Num Lock] + [-].
[R] [Enter]
This administrator-only Hotkey restores the
switch’s default values. See
[Station #][Port #] [Enter] Switches access to the computer that
corresponds to the specified Station
Number and Port Number.
[T]
Switches the
OSD Hotkey
between [Ctrl]
[Ctrl] and [Scroll Lock] [Scroll Lock].
[
←
]
Enters
Skip
mode and skips from the
current port to the first accessible port
previous to it.
[
→
]
Enters
Skip
mode and skips from the
current port to the next accessible port.
[
↑
]
Enters
Skip
mode and skips from the
current port to the last accessible port of the
previous station.
[
↓
]
Enters
Skip
mode and skips from the
current port to the first accessible port of the
next station.