ATEN CL5808N 8-Port 19" Dual Rail LCD Combo KVM Switch - Manual (Page 52)

CL5808/CL5816 User Manual
42
F5: SKP
Clicking the F5 field or pressing [F5] invokes Skip mode. This function
enables you to easily skip backward or forward – switching the console focus
from the currently active computer port to the previous or next available one.
Š The selection of computers to be available for skip mode switching is
made with the
Scan–Skip mode setting under the F3: SET function (see
page 36).
Š When you are in skip mode:
press [
←
] to switch to the previous computer in the list
press [
→ ]
to switch to the next computer in the list
press [
↑ ]
to switch to the last computer on the previous station in the list
press [
↓ ]
to switch to the first computer on the next station in the list.
Note: When you skip, you only skip to the previous or next available
computer that is in the
Scan–Skip mode selection (page 37).
Š If a port has been selected for Scan–Skip mode, when the focus switches to
that port a left/right triangle symbol appears before its port ID display.
Š While skip mode is in effect, the console will not function normally. You
must exit skip mode in order to regain control of the console.
Š To exit skip mode, press [Spacebar] or [Esc] .