ATEN CL5808N 8-Port 19" Dual Rail LCD Combo KVM Switch - Manual (Page 61)

5. Keyboard Port Operation
51
Hotkey Invocation Key Selection
The keys used to invoke Hotkey Mode (see Invoking Hotkey Mode , page 46)
can be toggled between
[Num Lock] + [-] and
[Ctrl] + [F12]
To toggle between them, do the following:
1. Invoke Hotkey mode (see page 46).
2. Press [H] .
After you press [H], the command line displays HOTKEY HAS BEEN
CHANGED for one second; then the message disappears and you
automatically exit Hotkey mode.
OSD Hotkey Selection
The Hotkey sequence used to call up the OSD can be toggled between
[Scroll Lock] [Scroll Lock] and
[Ctrl] [Ctrl]
To toggle between them, do the following:
1. Invoke Hotkey mode (see page 46).
2. Press [T] .
After you press [T], the command line displays HOTKEY HAS BEEN
CHANGED for one second; then the message disappears and you
automatically exit Hotkey mode.