ATEN CL5808N 8-Port 19" Dual Rail LCD Combo KVM Switch - Manual (Page 47)

4. OSD Operation
37
(Continued from previous page.)
Setting Function
SCAN–SKIP
MODE Selects which computers will be accessed under skip mode (see
F5 SKP , page 42), and Auto Scan mode (see F7 SCAN , page 44.
Choices are:
ALL - All the ports which have been set accessible (see SET
ACCESSIBLE PORTS , page 39);
QUICK VIEW - Only those ports which have been set accessible
and have been selected as quick view ports (see SET QUICK
VIEW PORTS , page 40);
POWERED ON - Only those ports which have been set accessible
and are powered on;
QUICK VIEW + POWERED ON - Only those ports which have
been set accessible and have been selected as quick view ports
and are powered on. The default is ALL.
Note: The quick view choices only show up on the administrator's
screen, since only he has Quick View setting rights (see SET
QUICK VIEW PORTS , page 40, for details).
SCREEN
BLANKER If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30
minutes, then press
[Enter] . The default setting of 0 disables this
function.
HOTKEY
COMMAND
MODE Enables / disables the Hotkey command function in case a conflict
occurs with programs running on the computers.
HOTKEY Sets the keyboard shortcut for invoking Hotkey Mode (see
page 36). Choices are: [NUM LOCK] + [-] (minus) (default), and
[CTRL] + [F12] .
OSD
LANGUAGE Sets the language used in the OSD. Choices are: English,
German, Japanese, Simplified Chinese and Traditional Chinese.
TOUCHPAD Enables / disables the touchpad.