ATEN CL5808N 8-Port 19" Dual Rail LCD Combo KVM Switch - Manual (Page 62)

CL5808/CL5816 User Manual
52
Port OS Selection
A port’s operating system can be configured so that it matches the one that is
used by the computer attached to it. To configure a port’s operating system
configuration, do the following:
1. Invoke Hotkey mode (see page 46).
2. Refer to the table below.
3. Press the function key that corresponds to the OS configuration you want
for the port.
After pressing a function key you automatically exit Hotkey mode.
Restore the Default Values
This administrator only Hotkey restores the CL5808/CL5816 default values
(see
RESTORE DEFAULT VALUES , page 40). To restore the CL5808/CL5816
to its default values, do the following:
1. Invoke Hotkey mode (see page 46).
2. Press [R] .
3. Press [Enter] .
After you press [Enter], the command line displays RESET TO DEFAULT
SETTING for three seconds; then the message disappears and you
automatically exit Hotkey mode.
Key Description
F1 Sets the Port OS to Windows
F2 Sets the Port OS to Mac
F3 Sets the Port OS to Sun