FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) - Manual (Page 18)

Notes on Usage
Notes when Handling the Main Unit
❏
Do not suddenly change the temperature in the room where this printer is installed.
If the temperature changes suddenly, drops of water (condensation) could occur inside the printer which may
have an adverse effect on operations.
❏
Use the printer in an environment with a temperature of 10 to 35 °C, and a humidity of 20 to 80 %. When the
printer is placed on a system rack, make sure the environment of the rack is within these ranges.
❏
Do not place any containers containing water, such as vases or cups, on the printer. If water enters the printer, it
may breakdown. Also, do not put any heavy objects on the printer.
❏
The printer is equipped with several vents. The vents take in and exhaust air to cool the printer internally. Do not
block these vents by placing any objects against them, or by covering them with film sheets or paper.
❏
Do not use accessories designed for this printer with any other products.
❏
If the printer's covers are opened during printing, a safety device is activated and printing is stopped
automatically. Do not turn off the printer in this condition. This could cause the print head nozzles to dry and
print quality to decline.
❏
Depending on the performance of the computer being used, the printer stops printing temporarily; however, this
is not a malfunction. This problem does not normally occur for Windows 7 or later.
The printer and the computer are communicating. Do not do anything to interfere with the printing operation,
such as opening covers or removing the paper.
❏
If the printer is not used for an extended period of time, make sure you leave the Ink cartridges and Maintenance
Cartridge installed.
❏
Do not leave the printer for more than three days in a state in which the power was turned off due to a power outage
and so on. Paper may curl which could cause a decline in printer performance.
❏
Contact our service support when transporting the printer.
Notes on the Paper
Notes on Handling
Use paper recommended by our company.
Note the following points when handling the paper.
❏
Do not bend the paper or scratch the surface of the printable side.
❏
Do not touch the printable side of the paper. Moisture and oil from hands can have an adverse effect on the print
quality.
❏ Handle the paper by the edges. We recommend wearing cotton gloves.
Frontier-S Operation Guide
Introduction
18