FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) - Manual (Page 92)

Cause What to do
The printed surface is scuffed or soiled. Is the paper too thick or too thin?
Check that the paper can be used with this printer.
U “Printer Specifications” on page 95
The paper is creased. Are you using the printer at normal room temperature?
The printer should be used at normal room temperature (temperature: 15 to 25 °C,
humidity: 40 to 60 %). For information about paper such as thin paper from other
manufacturers that requires special handling, see the documentation supplied
with the paper
Problems when Cutting Paper
Cause What to do
The cut is crooked, the cut edge is frayed or
turned up, or the coating is cracked. The cutter needs to be replaced.
Contact service support to request cutter replacement.
When a Problem Cannot be Cleared
If you cannot resolve a problem after taking the measures described in the "Troubleshooting" section, contact service
support.
Frontier-S Operation Guide
Troubleshooting
92