FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) User Manual
Page 96
Ink Specifications
Type
Ink cartridges
Ink type
Six color water-based dye
Use by date
Three years after manufacture
Storage temperature
In the packaging: -20 to 40 °C (within one month at 40 °C)
Installed in printer: -20 to 40 °C (within one month at 40 °C)
Transporting: -20 to 60 °C (within one month at 40 °C, 72 hours at 60 °C)
Capacity
200 ml
Cartridge dimensions
25 (W) x 200 (D) x 100 (H) mm
c
Important:
❏
The ink freezes if left at below -15 °C for a long time. If it does freeze, leave it at room temperature (25 °C) for at
least four hours until it has defrosted (without condensation).
❏
Do not disassemble the ink cartridges or refill the ink.
Maintenance Cartridge Specifications
Type
Maintenance cartridge for waste ink.
Number installed
1
Environmental conditions
In the packaging: -20 to 40 °C (temperature), 20 to 85% (humidity)
Installed in printer: Conforms to the general specifications below
Transporting: -20 to 60 °C (temperature) 5 to 85% (humidity) (within one month at 40 °C, 120 hours
at 60 °C)
Cartridge dimensions
78.8 (W) x 254.5 (D) x 38.5 (H) mm
General Specifications
Temperature
Operating: 10 to 35 °C
Storage (before unpacking): -20 to 60 °C (within 120 hours at 60 °C, one month at 40 °C)
Storage (after unpacking): -20 to 40 °C (within one month at 40 °C)
Humidity
Operating: 20 to 80% (without condensation)
Storage (before unpacking): 5 to 85% (without condensation)
Storage (after unpacking): 5 to 85% (without condensation)
Weight
Approx. 23 kg (printer only)
Dimensions
460 (W) x 430 (D) x 354 (H) mm
U
Frontier-S Operation Guide
Appendix
96