FujiFilm Quality Dry Photo Paper for Frontier-S DX100 Printer (Glossy, 4" x 213' Roll, 2-Pack) User Manual
Page 74
Code
Message
What to do
W-5102
Communication error
The incorrect product may be selected
Delete all print jobs remaining in the operating system's print
queue. Do one of the following.
- The product is connected to "%queuename%". Print using
this product.
- Connect the product to the computer and turn the power on.
If you turn the power off during printing, cancel the print job.
After deleting all of the print jobs, check that
the correct printer is selected in the printer
driver. When you have selected the printer,
check that the cables are connected
correctly, and then restart the printer.
If the error persists, contact service support.
W-5103
The different product is selected
Delete all print jobs remaining in the operating system's print
queue. A product selected in the driver is different from a
product to print.
Check the driver settings and the product.
After deleting all of the print jobs, check that
the correct printer is selected in the printer
driver.
If the error persists, contact service support.
W-5104
Not ready
You cannot print offline.
Connect the product to computer and turn the power on.
Click [Online] to print when displayed, or click [Print Queue]
and change to Online settings.
Click [Cancel] to cancel printing when displayed.
Check that the printer is on and the cables
are connected correctly.
If
Use Printer Online
is displayed in the
printer window, click it to put the printer
online. If it is not displayed, click
Display
Print Queue
, and then put the printer
online manually.
W-5105
Paused
You cannot print when it is in pause.
Click [Resume] to print when displayed, or click [Print Queue]
and deselect "Pause Printing" in the "Printer" menu.
Click [Cancel] to cancel printing when displayed.
If
Resume Printing
is displayed in the
printer window, click it to resume printing. If
it is not displayed, click
Display Print
Queue
, and then resume printing manually.
E-2101 to
E-2104
Parts have reached the end of their service life.
xxxxxx
Contact a technical representative.
Delete all print jobs remaining in the operating system's print
queue.
After deleting all of the print jobs, contact
service support and request replacement
for the part displayed in xxxxxx.
E-9901(xxxx)
A printer system error occurred.
Delete all print jobs remaining in the operating system's print
queue.
Turn the printer off. Check if there is any paper remaining
inside the printer, and then turn the printer back on.
Contact service support if the error continues to occur.
After deleting all of the print jobs, restart the
printer.
If the error persists, a malfunction may have
occurred. Contact service support.
-
Could not find specified file.
Click
OK
.
If the same message is still displayed, check
that the printer window is displayed. If it is
not displayed, restart your computer.
If the printer window is still not displayed,
then reinstall the printer driver.
Depending on the usage environment, you
may be able to resolve this problem simply
by clicking
OK
.
Frontier-S Operation Guide
Troubleshooting
74